Honda Accord Owner's Manual page 167

Main Menu
Playing the FM/AM Radio (Models with navigation system)
The skip (seek)
SKIP (SEEK)
function searches up and down from
the current frequency to find a
station with a strong signal. To
activate it, press either side (
) of the skip bar, then release it.
You can also activate the skip
function (SEEK is displayed on the
screen) by pushing the interface
selector to the right or left.
164
Table Of Contents
SCAN ICON
or
SCAN The SCAN function
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN side of
the SCAN/A.SEL bar, then release it.
To scan with the interface dial, push
the selector down, and then push it
to the right. You will see SCAN
flashing on the screen.
2008 Accord Coupe
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 10 seconds. If you do
nothing, the system will then scan
for the next strong station and play it
for 10 seconds. When it plays a
station that you want to listen to,
press the scan side of the bar again,
or push the interface selector to the
right again.
Preset Each preset button or
preset icon can store one frequency
on AM and two frequencies on FM.
To store a preset memory location:
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
two sets of FM frequencies with
the preset buttons (on-screen
icons).