Honda Accord Owner's Manual page 230

Main Menu
4. Press and release the Talk button.
After the beep, say ''Yes.'' The
HFL response is ''Preparing to
delete Eric's phone. Say OK to
continue, otherwise, say Go back,
or Cancel.''
5. Press and release the Talk button.
If you say ''OK'' after the beep, the
HFL response is ''The phone has
been deleted. Returning to the
main menu.'' If you say ''Go back,''
or ''Cancel,'' the phone will not be
deleted.
To list all paired phones, do this:
1. Press and release the Talk button.
After the beep, say ''Phone setup.''
The HFL response is ''Phone
setup options are status, pair, edit,
delete, and list.''
2. Press and release the Talk button.
After the beep, say ''List.'' The
HFL responds by listing the name
of each paired phone. When all
Table Of Contents
phones paired to the system have
been read, the HFL response is
''The entire list has been read.
Returning to the main menu.''
To find out the status of the phone being
used, do this:
1. Press and release the Talk button.
After the beep, say ''Phone setup.''
The HFL response is, ''Phone
setup options are status, pair, edit,
delete, and list.''
2. Press and release the Talk button.
After the beep, say ''Status.'' An
example of the HFL response is,
''Eric's phone is linked. Battery
strength is three bars. Signal
strength is five bars, and the
phone is roaming. Returning to the
main menu.''
2008 Accord Coupe
Bluetooth HandsFreeLink
To change from the currently linked
phone to another paired phone, do this:
1. Press and release the Talk button.
After the beep, say ''Next phone.''
The HFL response is ''Searching
for the next phone.'' The HFL
then disconnects the linked phone
and searches for another paired
phone. If the HFL finds it, an
example of the HFL response is,
''Paul's phone is linked.'' If no
other phones are found, the first
phone remains linked.
227