Honda Accord Owner's Manual page 168

Main Menu
2. Use the tune, skip (seek), scan, or
RDS function to tune the radio to a
desired station.
3. Press the preset button, and hold
it until you hear a beep. You can
also store frequencies with the
interface dial. Select the preset
icon you want to store the
frequency on, then press ENTER
on the interface selector, and hold
it for more than 2 seconds.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
Table Of Contents
Playing the FM/AM Radio (Models with navigation system)
A.SEL INDICATOR
PRESET ICON
A.SEL ICON
AUTO SELECT
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
Push the interface selector down to
scroll down the screen, highlight
A.SEL, then press ENTER on the
interface selector. You will see
A.SEL on the screen, and the system
goes into scan mode for several
seconds.
2008 Accord Coupe
To turn off auto select,
on the interface selector.
You can also press the A.SEL side of
the SCAN/A.SEL bar. You will see
A.SEL on the screen, and the system
goes into scan mode for several
seconds. The system stores the
frequencies of six AM and twelve
FM stations in the preset buttons.
You will see ''0'' displayed if auto
select cannot find a strong station for
If you are every preset button.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons (icons) as previously
described.
press ENTER
165