Dc Operation - Honda EB3000c Owner's Manual

DC OPERATION

The DC receptacle should ONLY be used for charging 12-volt
automotive type batteries. The DC charging output is not regulated.
Connecting the battery charging cable:
1. Before connecting the battery charging cable (optional equipment)
to a battery that is installed in a vehicle, disconnect the vehicle
battery ground cable from the negative ( ) battery terminal.
The battery gives off explosive gases; keep sparks, flames and
cigarettes away. Provide adequate ventilation when charging or using
batteries.
WARNING: Battery posts, terminals and related accessories contain
lead and lead components.
2. Plug the battery charging cable into the DC receptacle of the
generator.
3. Connect the red lead of the battery charging cable to the positive
( ) battery terminal and the black lead to the negative ( ) battery
terminal.
DC CIRCUIT PROTECTOR
4. Start the generator.
24
Wash hands after handling.
DC RECEPTACLE
YELLOW INDICATOR
: OFF
: ON