Table of Contents
Advertisement
to select desired items.
C
Press
4
/ ENTER button and then use
to adjust the setting.
Balance
Y
Adjust to emphasize left or right speaker balance.
Bass
Y
Adjust to increase or decrease lower-pitched sounds.
Treble
Y
Adjust to increase or decrease higher-pitched sounds.
SRS TS XT
Y
To turn the simulated surround sound on and off.
Equalizer
Y
To adjust the equalizer: Off, Rock, Pop, Live, Dance,
Techno, Classic and Soft.
Speaker
: To adjust
the speaker on or off.
Y
SPDIF Type
Y
To adjust the SPDIF output: Off, Dolby Digital and
PCM.
AVL (Automatic Volume Control)
Y
This will reduces the differences in volume level
among broadcasters.
Audio Only
Y
Press
4
/ ENTER button to confirm, the following
display will appear on the screen.
3
to select OK, then press OK to confirm. The TV screen
Press
will be black and no picture , but the sound is still normal.
You can press POWER button to reveal the picture on the screen.
If enter Audio Only mode, press
OK
SAP Broadcasts Setup
This TV can receive MTS stereo programs and SAP
(Secondary Audio Program) that accompanies the stereo
program; if the station transmits an additional sound
signal as well as the original one.
When having selected SAP button on the remote
control, this TV can only receive the signal when the TV
station transmits the proper signals.
Mono sound is automatically received if the broadcast is
only in Mono; even though Stereo or SAP has been selected.
Select Mono if you want to listen to mono sound during
3
/
4
button
POWER
to exit!
Cancel
stereo/ SAP broadcasting. Stereo or SAP can be received
in a Analog channel.
A
SAP button to select your desired MTS mode in
Use
a analog signal.
•
Each time you press
SAP appear. If other languages are available on the
digital signal, select them with the SAP button.
B
Press
EXIT button to save and return to TV viewing.
Function menu
Menu Language
When you start using your set for the first time, you must
select the language which will be used for displaying
menus and indications.
A
Press
MENU button and then use
select Function menu.
B
Press
4
/ ENTER button and then use
button to select Language.
C
Press
3
/
4
button to select language.
( English, Spanish or French )
Language
Video
OSD Timeout
OSD Transparency
Audio
Screen Mode
Channel
DPMS
Blue Screen
Function
DCR
Time Setup
Lock
Closed Caption
Default
Function
OSD Timeout
A
Press
MENU button and then use
select Function menu.
B
Press
4
/ ENTER button and then use
button to select OSD Timeout.
C
button to select Short, Middle or Long.
Press
3
/
4
(Short is for 5 seconds; Middle is for 10 seconds;
Long is for 15 seconds)
OSD Transparency
Operation
SAP button, Mono, Stereo or
6
5
/
button to
6
5
/
English
Short
Middle
Normal
On
On
On
Select
EXIT
Back
/
6
5
/
button to
6
5
/
Haier LCD HDTV
EN-18
Advertisement
Table of Contents
