Haier HL32K2a Important Safety Instructions Manual
Haier HL32K2a Important Safety Instructions Manual

Haier HL32K2a Important Safety Instructions Manual

User manual

Advertisement

Quick Links

Warning

Warning
CAUTION
RISK ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
!
Caution:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do
not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Important Safety Instructions

1.
Read t
hese instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/ Apparatus combination to
avoid injury from tip-over.
13.
Unplug this apparatus during lightning storms or when unused for long periods of time.
14.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
16.
The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus
normal use.
EN-1
Haier LCD HDTV
!
!
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

Advertisement

Table of Contents
loading

Summary of Contents for Haier HL32K2a

  • Page 1: Warning

    The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus normal use. EN-1 Haier LCD HDTV...
  • Page 2: Fcc Statement

    To assure continued compliance and possible undesirable interference, the provided ferrite cores must be used when connecting this LCD display to video equipment; and maintain at least 40cm spacing to other peripheral device. CANADIAN NOTICE: This Class B digital apparatus compiles with Canadian ICES-003. Haier LCD HDTV EN-2...
  • Page 3: Safety Instructions

    SAVE THESE INSTRUCTIONS Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit.
  • Page 4: Table Of Contents

    Mute ..................15 Video menu ............15 How to select picture mode ........... 15 How to customize your own picture status ....16 PC Set ..................17 Audio menu ............17 How to select audio mode ..........17 Haier LCD HDTV EN-4...
  • Page 5: Introduction

    B Remote Sensor Do not put anything near the sensor, which may block the remote control signal. Connect a USB flash drive to view MPEG2 videos, 6 USB input JPEG images or listen to MP3 songs. EN-5 Haier LCD HDTV...
  • Page 6: Connection Options

    Connect the audio L/R cables to your audio equipment. Connect the audio L/R cables from a computer PC Audio In to this jack. Connect a video cable from a computer to this PC Video In jack. Haier LCD HDTV EN-6...
  • Page 7: Universal Remote Control

    Press again to return to the program. Q CH.LIST Open the channel list in TV. R FAV.LIST Press to open the favorite channel list in TV. S ARC(Aspect Ratio Control) Press to change the aspect ratio. EN-7 Haier LCD HDTV...
  • Page 8: Installation

    If the antenna needs to be split for two TV’s, install a „ “2-Way Signal Splitter” in the connections. To install the antenna properly please contact a „ professional in your area. Note All cables shown are not included with the TV. Haier LCD HDTV EN-8...
  • Page 9: Choose Your Connection

    VCR. (Refer to the VCR owner’s manual.) in the figure. INPUT button Select the input source with using the on the remote control, and then press button to select the source, press ENTER button to confirm. External A V Source Setup EN-9 Haier LCD HDTV...
  • Page 10: Connecting A Dtv (Digital Tv)

    Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) • If the graphic card on the computer does not output analog and digital RGB simultaneously, Use INPUT on the remote control to select Haier LCD HDTV EN-10...
  • Page 11: Hdmi And Dvi Input

    The synchronization input form for Horizontal and How To Use Vertical frequencies is separate. • If the source device supports Auto DVI function, the output resolution of the source device will be EN-11 Haier LCD HDTV...
  • Page 12: Connecting Headphones

    If the polarized AC cord does not fit into a non- polarized AC outlet, do not attempt to file or cut the blade. It is the user’s responsibility to have an electrician replace the obsolete outlet. Haier LCD HDTV EN-12...
  • Page 13: Operation

    / ENTER button and then use button / ENTER button to select Tuner. Press to select Language. Press button to select language. button to select Cable or Antenna Press ( English, Spanish or French) mode. button to select Channel Scan. Press EN-13 Haier LCD HDTV...
  • Page 14: Channel Skip

    / ENTER button and then use Press button to select Channel Skip. Press button to select a channel, then press 1.Time shift time. The time delay to the current program ENTER button to toggle between and . time. Haier LCD HDTV EN-14...
  • Page 15: Select The Desired Program

    „ The picture mode provides the pre-defined images number increasing direction. settings: Standard, Vivid, Custom and Mild . CH- button to select a channel number in Press „ MENU button and then use Press button to EN-15 Haier LCD HDTV...
  • Page 16: How To Customize Your Own Picture Status

    Lock This will adjust the sharpness of fine details in the picture. Select EXIT Back Note MJC Demo Only when the item of mode is custom, the 120HZ FULL MOTION Brightness, Contrast, Color, Tint, Sharpness and Haier LCD HDTV EN-16...
  • Page 17: Pc Set

    / ENTER button and then use Press button to select PC. How to Customize your own audio status MENU button and then use Press button to select Audio menu. / ENTER button and then use Press button EN-17 Haier LCD HDTV...
  • Page 18: Sap Broadcasts Setup

    Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected. OSD Transparency Select Mono if you want to listen to mono sound during Haier LCD HDTV EN-18...
  • Page 19: Dpms

    / ENTER button and then use Press button Timer: Press VOL+/- button to select On or Off . To to select Blue Screen. select Off, the time can not be adjusted. EN-19 Haier LCD HDTV...
  • Page 20: Close Caption

    OK or Cancel, then press OK to confirm. If OK the parameter will return to the Text1: For program guide and other information factory set. displayed by broadcasters. (This blocks a large Haier LCD HDTV EN-20...
  • Page 21: Lock Menu

    (Adult only) and security default password is 9-4-4-3. If you set PG-13 : G and PG movies will be available, PG-13, R, NC-17 and X will be blocked. CA Eng Rating: Children Children eight years and older EN-21 Haier LCD HDTV...
  • Page 22: Channel Block

    Analog Channel Block Select EXIT Back ENTER Note The V-chip will automatically block certain Program Block categories that are “More restrictive” . For example, if you block “ ” sub-rating in TV-PG, then the “ ” Haier LCD HDTV EN-22...
  • Page 23: Other Functions

    .( Press OK to display password menu and Channel input your password.) Function Other Functions Lock Allowed Rating Blocked Rating CA Eng Rating ENTER Select EXIT Back Brief Info CA Fren Rating Brief Info shows the present screen information. EN-23 Haier LCD HDTV...
  • Page 24: Using The Guide

    Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. Haier LCD HDTV EN-24...
  • Page 25: Usb Input

    Not all TV programs and product previous menu. commercials are made for broadcast with Closed Caption information included. Refer to your area’s To play pictures TV program listings for the TV channels and times EN-25 Haier LCD HDTV...
  • Page 26: To Play Music

    Press 1. Play Time 4. Shuffle On or Off 2. File Name 5. Audio Only 3. Repeat 6. Information Press MENU button to display the option list. 1. Play/Pause Duration 2. Repeat Effect 3. Shuffle Information Haier LCD HDTV EN-26...
  • Page 27: To Play Video

    Do not remove USB device from the TV until you have exited the USB mode otherwise you may damage the USB device. Press MENU button, and the press to select Media Type , Press ENTER and press to select Video. Universal Remote Control EN-27 Haier LCD HDTV...
  • Page 28: Setting Up Your Remote Control

    CH+/CH- key. it will emit the Press and release the next or the previous POWER key code. The LED Default init status: TV/Haier codeset. blinks with 10 HZ freq, indicating that the Remote is Manually Programming the Control in manually scan mode.
  • Page 29: Remote Control Codes

    Press and holding the ENTER key and then press POWER Display mode key for 3 seconds, the LED will blink 3 times and turn off, default Haier codeset (001) will be programmed to the Choose the device you wish to program. control.
  • Page 30 032 060 062 065 126 127 134 149 150 186 200 340 186 Plasmsync 106 HP 204 219 187 Polaroid 211 217 220 228 315 339 107 Hyundai 188 Portland 060 061 062 066 076 333 349 352 108 Ilo 174 254 266 312 189 Price Club Haier LCD HDTV EN-30...
  • Page 31 014 136 203 244 263 Vector Research 331 350 Hiteker 264 Victor iLive 265 Vidikron 055 320 266 Vidtech 060 061 062 349 iLuv 267 Viewsonic 133 214 218 223 233 243 316 356 Initial 278 343 EN-31 Haier LCD HDTV...
  • Page 32 042 063 124 133 159 204 225 285 324 354 385 386 Symphonic 133 159 385 Howard Computers Teac 266 328 371 379 380 Technics Techwood Hughes Network Systems 013 110 122 124 125 130 Terapin Humax 110 122 Haier LCD HDTV EN-32...
  • Page 33 004 005 006 007 008 033 036 038 039 046 064 065 066 075 111 123 131 135 Philco Stack 013 031 Philips 008 016 017 019 021 022 049 050 085 Pioneer Superscan Sylvania 008 010 020 021 031 032 048 062 088 116 Primestar EN-33 Haier LCD HDTV...
  • Page 34 Cary Audio Design Panasonic 028 030 044 Casio Paragon Chase Technologies Philips 017 018 023 Clarinette Pioneer 002 026 033 038 046 Classe Popular Mechanics Classic Proscan 009 010 Coby 147 331 Pulsar Creative 274 302 Haier LCD HDTV EN-34...
  • Page 35: Maintenance

    (such as a vacation), it’s a good idea to unplug the power 113 Samsung 084 103 138 143 cord to protect against possible damage from lightning 114 Sansui 291 318 115 Sanyo 238 326 or power surges. 116 Sharp 205 242 296 EN-35 Haier LCD HDTV...
  • Page 36: Warranty

    Note yourself according to the instructions listed hereunder Do not leave the television with static picture in before contacting the after-sales service for technical an extended period as the image may become assistance. permanently burned. Haier LCD HDTV EN-36...
  • Page 37 This is not a defect covered by repairs performed by anyone other than an authorized the limited warranty. service center or dealer; nor shall Haier be liable, or in any way responsible for incidental or consequential Warranty economic or property damage.
  • Page 38 Warranty Haier LCD HDTV EN-38...

Table of Contents