Tv/Dvd Combo Components; Accessories; Front; Back - Dynex DX-22LD150A11 User Manual

TV/DVD combo components

TV/DVD combo components

Accessories

• Power cord
• TV stand and screws
• Remote control
• Remote control batteries (2 AAA)
• Component video cable
• Audio cable
• Quick Setup Guide

Front

# Component Description
1 Remote sensor Receives signals from the remote control. Do
not block.
2 Power indicator Lights blue when your TV/DVD combo is
turned on.
Lights red when your TV/DVD combo is in
standby mode.
No light when the power cord is unplugged.
For more information, see "Turning your
TV/DVD combo on or off" on page 12.
DX-19LD150A11/DX-22LD150A11

Back

P
B
P
R
## Component Description
1 AC INPUT Connect the power cord to this jack.
Note: Even when your TV/DVD combo is off,
power is still flowing through it. To disconnect
power, unplug the power cord.
2 ANT/CABLE IN Connect an antenna, cable TV, or a satellite
jack box to this jack. For more information, see
"Connecting an antenna, cable TV, or satellite
TV box" on page 9.
3 COMPONENT IN Connect a component video device to these
(Y, Pb,Pr) jacks jacks. For more information, see "Connecting
a component video device (better
connection)" on page 9.
4 VIDEO IN (S-Video Connect the video signal from an AV device
and Video) jacks to one of these jacks. For more information,
see "Connecting an S-Video device (good
connection)" on page 9, or "Connecting a
VCR or standard video device" on page 10.
5 VGA jack Connect the video signal from a computer to
this jack. For more information, see
"Connecting a computer" on page 10.
6 PC/DVI AUDIO IN Connect the audio signal from a computer or
jack a DVI device to this jack. For more
information, see "Connecting a computer" on
page 10, or "Connecting an HDMI or DVI
device (best picture) on page 9.
7 HDMI1 / HDMI2 Connect an HDMI device, such as a cable box
jacks or DVD player, to this jack. An HDMI cable
carries both video and audio, so you do not
need to make an audio connection. For more
information, see "Connecting an HDMI or DVI
device (best picture)" on page 9.
8 COMPONENT/ Connect the audio signals from a
S-VIDEO/AV IN component, S-Video, or composite device to
(L/R Audio) jacks these jacks.
9 AUDIO L/R OUT Connect an analog sound system, such as an
jacks analog audio amplifier, to these jacks. See
"Connecting a digital audio amplifier" on
page 11.
10 SPDIF OUT jack Connect a digital sound system, such as a
digital audio amplifier, to this jack. See
"Connecting a digital audio amplifier" on
page 11.
11 PHONE OUT jack Connect a headphone to this jack.
12 USB IN Plug a USB device, such as a flashdrive, into
this jack. See "Viewing photos" on page 29.
5
PC/DVI