Adjusting The Computer Image; Adjusting The Sound - Dynex DX-LDVD22-10A User Manual

Adjusting the sound

• Backlight–Adjusts the overall brilliance of the screen.
• Noise Reduction–Selects the noise reduction mode to
reduce picture noise (snow). Choose High, Middle,
Low, or Off.
• Advanced Contrast–Turn this On to optimize the
picture display for a more vivid image.
• Reset Picture Settings—Resets all picture settings to
factory default.
Note: You can only adjust Brightness, Contrast, Color Temperature, Tint,
and Sharpness if you set the Mode to Custom.
3 Press MENU to return to the previous menu, or press EXIT to
close the menu.

Adjusting the computer image

To adjust the computer image:
1 Make sure that your TV is in VGA mode. For more information, see
"On-screen menu overview" on page 11.
2 Press MENU. The on-screen menu opens.
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
VOL-
MOVE SELECT
ENTER
CH- CH+
VOL+
3 Press VOL+ or VOL– to highlight Settings, then press
ENTER/CH–. The Settings menu opens.
Settings Computer Settings
Parental Controls
Closed Caption
Time
Menu Settings
Input Labels
Computer Settings
VOL-
MOVE ENTER SELECT
CH- CH+
VOL+
4 Press CH+ or CH– to highlight Computer Settings, then press
ENTER/VOL+. The Computer Settings menu opens.
Settings Computer Settings
Auto Adjust
H. Position
V. Position
Phase
Reset Computer settings
VOL-
MOVE SELECT
ENTER
CH- CH+
VOL+
5 Press CH+ or CH– to highlight an option,
open the sub-menu, then press V0L+/- to
• Auto Adjust—Automatically adjusts the image settings,
such as position and phase
• H-Position—Moves the image right or left
• V-Position—Moves the image up or down
• Phase—Adjusts the focus of stable images
• Clock—Adjust the clock setting of the picture
PICTURE AUDIO CHANNELS SETTINGS
Custom
40
60
45
R5
+5
PREVIOUS EXIT
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
MENU PREVIOUS EXIT EXIT
PICTURE AUDIO CHANNELS SETTINGS
34
50
50
50
PREVIOUS EXIT
MENU EXIT
press ENTER/VOL+ to
adjust. You can select:
• Reset Computer Settings—Resets computer settings to
factory default
6 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting the sound
Adjusting the sound
To adjust the sound:
1 Press MENU. The on-screen menu opens.
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
VOL-
MOVE SELECT
ENTER
CH- CH+
VOL+
2 Press VOL+ or VOL– to highlight AUDIO, then press
ENTER/CH–. The Audio menu opens.
Audio
Equalizer
Equalizer Mode
Equalizer Setting
Balance
MTS/SAP
Audio Language
VOL-
MOVE SELECT
ENTER
CH- CH+
VOL+
3 Press CH+ or CH– to highlight an option,
open the sub-menu, then press CH+/- to adjust.
• Equalizer—Select OFF for normal frequency response or
ON for optimized frequency response.
• Equalizer Mode—Selects the sound mode.
Custom (for a customized sound mode), Standard,
Theater (for movies), Music (for musical programs), or
News (for news programs).
more times to cycle through the available sound modes.
• Equalizer Setting—Lets you set custom audio settings
when you select Custom.
• Treble—Press ENTER/VOL+ to open the sub-menu,
then press V0L+/- to adjust the high sounds.
when the equalizer is turned off).
• Bass—Press ENTER/VOL+ to open the sub-menu,
then press V0L+/- to adjust the low sounds.
when the equalizer is turned off).
• Balance—Press ENTER/VOL+ to open the sub-menu,
then press V0L+/- to adjust the
and right audio channels.
• MTS/SAP—Only available for analog channels. Also
available by pressing MTS/SAP on the remote control.
Options include:
• MONO—Select this option if there is noise or static on
weak stereo broadcasts.
• STEREO—Select this option for programs broadcast in
stereo.
PICTURE AUDIO CHANNELS SETTINGS
Custom
40
60
45
R5
+5
PREVIOUS EXIT
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
On
Custom
L5
Mono
English
PREVIOUS EXIT
MENU EXIT
press ENTER/VOL+ to
You can select:
You can select
You can also press AUDIO one or
(available
(available
balance between the left
13