Output 5 + 6 usable as additional mono delay line outputs.
Fig. 6.5: Stereo operation plus 2 woofer cabinets
Only two frequency ranges (Low and High) are used on each stereo side. The two passive speaker cabinets for the higher frequencies are limited towards the bass end
and are fine-tuned in their sound with the DCX's internal equalizer. The stereo bass signal is first sent to the active woofer, which also provides the passive woofer
cabinet with sufficient power for the right-hand low-frequency channel. The unused outputs 5 and 6 can be used as mono delay lines.
A reference-class reverb modeler & an ultra high-precision digital 24-bit/96 khz eq/rta mastering processor & the ultimate digital loudspeaker management system (3 pages)