Stereo Operation Plus Mono Subwoofer - Behringer ULTRADRIVE PRO DCX2496 User Manual

21
ULTRADRIVE PRO DCX2496 User Manual

6.4 Stereo operation plus mono subwoofer

XENYX X2222USB Mixing console
EUROLIVE B1800X PRO
B815NEO
Left active
loudspeaker
Passive mono subwoofer
SUM (A + B) signal
EUROPOWER EP2000
Stereo power ampli er (mono bridged)
Output 4 usable as additional mono delay line output.
Output 5 + 6 usable as additional stereo delay line output.
Fig. 6.4: Stereo operation plus mono subwoofer
A full-range stereo signal is sent to two active speaker cabinets for stereo reproduction. There is no need for a dedicated frequency separation because the crossover
and amplifier in the active speaker are perfectly adapted to each other. However, to achieve more power in the bass, low frequencies are cut off in the active cabinets
and routed to a subwoofer. The power amp is set to mono-bridged mode and the SUM signal derived from In A+B is sent to the subwoofer. Outputs 4 to 6 can be used
as mono or stereo delay lines.
Right
Stereo output
Left
High (1)
B815NEO
Right active
loudspeaker
In A In B
Outputs: 1 2 3 (4, 5 and 6 not used)
Low (3)