Standard Cmos Setup - ECS 945GCT-M Manual

For the purpose of better product maintenance, the manufacture reserves the
right to change the BIOS items presented in this manual. The BIOS setup
screens shown in this chapter are for reference only and may differ from the
actual BIOS. Please visit the manufacture's website for updated manual.

Standard CMOS Setup

This option displays basic information about your system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
System Date
System Time
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Third IDE Slave
IDE BusMaster
Floppy A
: Move Enter : Select
F1:General Help
System Date and Time
The Date and Time items show the current date and time on the computer. If
you are running a Windows OS, these items are automatically updated whenever you
make changes to the Windows Date and Time Properties utility.
Primary/Secondary/Third IDE Master/Slave
Your computer has one IDE channels and each channel can be installed with one or
two devices (Master and Slave). In addition, this motherboard supports four SATA
channels and each channel allows one SATA device to be installed. Use these items to
configure each device on the IDE channel.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Primary IDE Master
Device : Not Detected
Type
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T.
32 Bit Data Transfer
: Move Enter : Select
F1:General Help
Standard CMOS Setup
Sun, 01/ 01/2006
00:09:48
Use [ENTER], [TAB]
Not Detected
or [SHIFT-TAB] TO
Not Detected
Not Detected select a field.
Not Detected
Hard Disk
Use [+] or [-] to
ATAPI CDROM configure system Date.
Enabled
1 . .44 MB 3 1 / "
2
+/-/: Value F10: Save and Exit
F9: Optimized Defaults
ESC: Exit
Primary IDE Master
Select the type of device
connected to the system.
Auto
Auto
Auto
Auto
Auto
Auto
Disabled
+/-/: Value F10: Save and Exit
F9: Optimized Defaults
ESC: Exit
Using BIOS
Help Item
Help Item
27