Honda 2012 Pilot Owner's Manual page 310

Playing the FM/AM Radio (Models with navigation system)
Preset Each preset button or
preset icon can store one frequency
on AM and two frequencies on FM.
To store a preset memory location:
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
two sets of FM frequencies with
the preset buttons (on-screen
icons).
2. Use the tune, seek, or scan
function to tune the radio to a
desired station.
Press the preset button, and hold
3.
it until you hear a beep. You can
also store frequencies with the
interface dial. Select the preset
icon you want to store the
frequency on, then press ENTER
on the interface selector, and hold
it for more than 2 seconds.
Repeat steps 1 through 3 to store a
4.
total of six stations on AM and
twelve stations on FM.
302
A.SEL INDICATOR
A.SEL
If you are
AUTO SELECT
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Push the interface selector down to
display the AUDIO MENU. Turn the
interface dial to select A.SEL, then
press ENTER on the interface
selector. Turn the interface dial to
select ON, then press ENTER on the
interface selector. You will see
A.SEL on the screen and the system
goes into auto select mode for
several seconds.
The system stores the frequencies of
six AM and twelve FM stations in
the preset buttons (icons).
You will see ''0'' displayed if auto
select cannot find a strong station for
every preset button (icon).
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons (icons) as previously
described.
To cancel auto select, select A.Sel on
the audio menu again and turn the
interface dial to select A.SEL OFF.
This restores the presets you
originally set.