Accessories; Standard Accessories; Optional Accessories - Hitachi DH25PB Instruction Manual

WARNING:
NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1) Case (Molded plastic) (Code No. 318307) ....................................................................... 1
(2) Side Handle (Code No. 980939) ....................................................................................... 1
(3) Stopper (Code No. 980906) .............................................................................................. 1
(4) Dust Cup (Code No. 971787) ............................................................................................ 1

OPTIONAL ACCESSORIES ........

1. Drilling anchor holes (Rotation + Striking)
Drill Bit (Slender shaft)
(1) Drill Bit
(Slender Shaft)
Outer diameter Effective Length
1/8"
(3.4mm)
9/64"
(3.5mm)

ACCESSORIES

ALWAYS use Only authorized HITACHI replacement parts and
accessories. NEVER use replacement parts or accessories which are
not intended for use with this tool. Contact HITACHI if you are not sure
whether it is safe to use a particular replacement part or accessory
with your tool.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
(2) Adaptor for slender
shaft (SDS-plus
shank)
(1) Drill Bit (Slender Shaft)
Overall Length
1-25/32"
(45mm)
1-25/32"
(45mm)
sold separately
Code No.
3-35/64"
306369
(90mm)
3-35/64"
306368
(90mm)
English
(2) Adaptor for
Slender Shaft
Code No.
306370
19