Gigabyte GA-X58A-UD5 User Manual page 11

Storage Interface  JMicron JMB362 chip:
USB
IEEE 1394
Internal
Connectors
Back Panel
Connectors
I/O Controller
- 2 x eSATA 3Gb/s connectors (eSATA/USB Combo) on the back panel sup-
porting up to 2 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, and JBOD
iTE IT8720 chip:

- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
Integrated in the South Bridge

- Up to 10 USB 2.0/1.1 ports (6 on the back panel, including 2 eSATA/USB
Combo, 4 via the USB brackets connected to the internal USB headers)
NEC chip:

- Up to 2 USB 3.0/2.0 ports on the back panel
T.I. TSB43AB23 chip

- Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a
bracket connected to the internal IEEE 1394a header)
1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

 1 x floppy disk drive connector
1 x IDE connector

8 x SATA 3Gb/s connectors

2 x SATA 6Gb/s connectors

1 x CPU fan header

3 x system fan headers

1 x power fan header

1 x North Bridge fan header

1 x front panel header

1 x front panel audio header

1 x CD In connector

1 x S/PDIF In header

1 x S/PDIF Out header

2 x USB 2.0/1.1 headers

1 x IEEE 1394a header

1 x power button

1 x reset button

1 x PS/2 keyboard port

1 x PS/2 mouse port

1 x coaxial S/PDIF Out connector

1 x optical S/PDIF Out connector

1 x clearing CMOS button

2 x IEEE 1394a ports

4 x USB 2.0/1.1 ports

2 x USB 3.0 ports

2 x eSATA/USB Combo connectors

 2 x RJ-45 port
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/

Side Speaker Out/Line In/Line Out/Microphone)
iTE IT8720 chip

- 11 - Hardware Installation