Gigabyte GA-P55A-UD3P User Manual page 88

Lga1156 socket motherboard
Hide thumbs Also See for GA-P55A-UD3P:
Table of Contents

Advertisement

Step 3:
After entering the CREATE VOLUME MENU screen, enter a volume name with 1~16 letters (letters cannot
be special characters) under the Name item and press <Enter>. Then, select a RAID level (Figure 4). RAID
levels supported include RAID 0, RAID 1, Recovery, RAID 10, and RAID 5 (the selections available depend
on the number of the hard drives being installed). Press <Enter> to proceed.
[ hi ]-Change
Step 4:
Under Disks item, select the hard drives to be included in the RAID array. If only two hard drives are installed,
they will be automatically assigned to the array. Set the stripe block size (Figure 5) if necessary. The stripe
block size can be set from 4 KB to 128 KB. Once you have selected the stripe block size, press <Enter>.
[ hi ]-Change
Appendix
Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
Name : Volume0
RAID Level : RAID0(Stripe)
Disks :
Strip Size :
Capacity : 111.7 GB
Sync : N/A
Choose the RAID level:
RAID0: Stripes data (performance).
RAID1: Mirrors data (redundancy).
Recovery: Copies data between a master and a recovery disk.
RAID10: Mirrors data and stripes the mirror.
RAID5: Stripes data and parity.
[TAB]-Next
Figure 4
Intel(R) Rapid Storage Technology - option ROM - 9.5.0.1037
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
Name : Volume0
RAID Level : RAID0(Stripe)
Disks :
Strip Size :
Capacity : 111.7 GB
Sync : N/A
The following are typical values:
RAID0
RAID10 - 64KB
RAID5
[TAB]-Next
Figure 5
Select Disks
128KB
Create Volume
[ HELP ]
[ESC]-Previous Menu
Select Disks
128KB
Create Volume
[ HELP ]
- 128KB
- 64KB
[ESC]-Previous Menu
- 88 -
[ENTER]-Select
[ENTER]-Select

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ga-p55a-ud3r

Table of Contents