Product Specifications - Gigabyte GA-P55A-UD3P User Manual

1-2

Product Specifications

CPU
Chipset
Memory
Audio  Realtek ALC889 codec
 Support for S/PDIF In/Out

LAN
Expansion Slots 
Multi-Graphics
Technology
Storage Interface 
Hardware Installation
Support for an Intel

/Intel Core i3 series processor in the LGA1156 package
® ™
(Go to GIGABYTE's website for the latest CPU support list.)
L3 cache varies with CPU

Intel P55 Express Chipset
®

4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory

Dual channel memory architecture

Support for DDR3 2200/1333/1066/800 MHz memory modules

Support for non-ECC memory modules

 Support for Extreme Memory Profile (XMP) memory modules
(Go to GIGABYTE's website for the latest supported memory speeds and
memory modules)
 High Definition Audio
 2/4/5.1/7.1-channel
 Support for Dolby
Support for CD In
1 x Realtek RTL8111E chip (10/100/1000 Mbit)

1 x PCI Express x16 slot, running at x16 (PCIEX16)
(The PCIEX16 slot conforms to PCI Express 2.0 standard.)
1 x PCI Express x16 slot, running at x4 (PCIEX4)

2 x PCI Express x1 slots

3 x PCI slots

Support for ATI CrossFireX

Chipset:
- 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3,
SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
Marvell 9128 chip:

- 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to
2 SATA 6Gb/s devices
- Support for SATA RAID 0 and RAID 1
 JMicron JMB362 SATA2 chip:
- 2 x eSATA 3Gb/s connectors on the back panel supporting up to 2 SATA
3Gb/s devices
- Support for SATA RAID 0, RAID 1, and JBOD
iTE IT8213 chip:

- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
iTE IT8720 chip:

- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
Core i7 series processor/Intel
® ™
Home Theater
®
technology
™
- 10 -
Core i5 series processor
® ™
(Note 2)
(Note 3)
(Note 4)
(Note 1)