Gigabyte GA-P61-USB3-B3 User Manual page 24

7) SATA2_0/1/2/3 (SATA 3Gb/s Connectors, Controlled by H61 Chipset)
The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard.
Each SATA connector supports a single SATA device.
8) GSATA3_4/5 (SATA 6Gb/s Connectors, Controlled by Marvell 88SE9172 chip) j
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The Marvell 88SE9172 chip
supports RAID 0 and RAID 1. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on
configuring a RAID array.
A RAID 0 or RAID 1 configuration requires two hard drives.
j Only for GA-PA65-D3-B3.
Hardware Installation
7 7
SATA2_3 SATA2_1
SATA2_2 SATA2_0
1 1
7
GSATA3_5
GSATA3_4
1
- 24 -
DEBUG DEBUG
PORT PORT
Pin No. Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
DEBUG
PORT
DEBUG
PORT
Pin No. Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
Please connect the L-shaped end of
the SATA cable to your SATA hard
drive.