Auto Wall-Mount Adjustment (Sold Separately) - Samsung LN-T4669FX - 46" LCD TV Owner's Instructions Manual

Auto Wall-Mount Adjustment (Sold
separately)
Once the auto wall mount is installed, your TV's position can be easily adjusted.
TV Rear Panel
Auto Wall-Mount
EX-UNK Cable (Not supplied)
Enterinq the menu
1. Press the A T, 4 or I_ button on your remote control.
The Walt Mount Adjustment screen is displayed.
If the Wall Mount Adjustment screen is not displayed when clicking on a direction
button while watching your TV, use the menu to display that screen.
• Press the MENU butt on to display the menu. Press the A or T button to select
'Setup", then press the ENTER button.
• Press the _, or T button to select 'Walt-Mount Adjustment", then press the
ENTER button.
Rememberin_l the Position
2. Adjust to the desired position using the A,'_,_,_ buttons.
>- If you press an arrow button when no OSD is displayed on the TV screen, the
Adjustment screen appears.
Press the INFO button to reset. Press the ._ or _ button to select "Yes", then
press the ENTER button.
The position is initialized to the default setting.
3. Press the blue button.
Press the A and _' buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
:_ To not save the current position, press the RETURN button.
When selecting a save mode, you cannot use the Color buttons.
4. Press the ENTER button to save.
:_ When Position1 is selected, the message "Current position saved as Position1" is
displayed.
5. Press the ENTER button.
>- The saved Position appears on the left side of the OSD.
Movin_l to the remembered #osition
1. Complete Step 1 of"Entering the menu".
2. Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the
saved position.
>- You can move the waft mount to one of the 3 pre-set positions by pressing the
Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
> If you adjust the positon after moving to a pre-set position, the position display wilt
disappear.
SLEEP SRS MTS _
>_ For installation, refer to the Installation Manual provided with the walt mount.
>_ For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company.
This installation manual is to be used when attaching the watl mount to a wall. When attaching to other building materials, please
contact your nearest dealer.
>- The auto walt mount will not work when Anynet + is operating.