Labeling Channels
Channels can be labeled so that their call letters appear whenever the channel is selected.
t,
Press the MENU button to display the menu.
Press the A or 'V button to select "Channel", then press the ENTER button.
Press the A or T button to select "Name", then press the ENTER button,
Press the _, or _' button to select the channel to be assigned a new name_
then press the ENTER button.
Press the h, or '_' button to select a letter_a number or a blank (Results in this
sequence: A...Z, 0...9, +, -, *,/, blank).
Press the I_ button to switch to the next field, which wilt be selected.
Select a second letter or digit by pressing the A or 'V button, as above.
Repeat the process to select the last three digits. When you have finished_
press the ENTER button to assign the new name.
To erase the assigned new name, select "Clear" by pressing the 4 or _ button_
then press the ENTER button.
Press the EXIT button to exit.
_" The names of digital broadcasting channels are automatically assigned and
thus cannot be assigned by users.
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area_ sometimes the LNA function can improve the reception (a low-noise preamplifier
boosts the incoming signal).
t=
2,
3,
Press the MENU button to display the menu.
Press the A or T button to select "Channet'_ then press the ENTER button.
Press the A or _' button to select "LNA", then press the ENTER
button.
Press the A or T button to select "On"_then press the ENTER button.
Press the EXIT button to exit.
LNA functions only when antenna is set to Air or Cable.
> The LNA setting must be made separately for each channel.
> If the picture is noisy with the LNA set to "On"_select "Off".