Connect - Denon AVR-A100 Owner's Manual

ENGLISH

Connect

• For the method of connecting 7.1-channel speakers, see page 5.
• For the method of connecting the TV, see page 6.
7.2- or 9.2-channnel (Surround back / Front height /
Front wide speaker) connection
The illustration on the right shows a connection example for performing
7.2-channel or 9.2-channel playback using the surround back, front
height, or front wide speakers.
If you connect the surround back, front height, and front wide speakers
before you start playback, the audio is played back by automatically
switching the speakers in accordance with the surround mode or input
signals.
To set the speakers for automatic switching, select "Amp Assign"
and set "Assign Mode" to "NORMAL" using steps 3 and 4 of "Set up
"Amp Assign"" (vpage 63).
n For connecting two subwoofers
Two subwoofers can be connected to this unit.
To use two subwoofers, set "Subwoofer" to "2 spkrs" using the
"Speaker Config." setting (vpage 95).
56
For speaker impedance and speaker cable connections, see page 5.
FHL
SW1 SW2
C
FL
FWL FWR
SL
SBL SBR
FHR
FR
SR