Installation Instruction; Choice Of Electrical Connection - Electrolux EDB705 Owner's Manual

INSTALLATION INSTRUCTIONS
WARNINGS:
WARNINGS:
This appliance must be installed by a
qualified electrician/competent person. Safety
may be impaired if installation is not carried
out in accordance with these instructions.
This appliance must be earthed.
Do not remove the screws from the earth tab
extending from the oven mains terminal block
(Fig. 1).
Before connecting the appliance make sure
that the voltage of your electricity supply is
the same as that indicated on the rating
plate. This is situated on the lower front frame
of the appliance upon opening the grill cavity
door. Alternatively the rating plate may also
be found on the back or top of some models
(where applicable).
Do not alter the electrical circuitry of this
appliance.
CHOICE OF ELECTRICAL
CONNECTION
The appliance should be operated using at
least 6mm² twin core and earth PVC
insulated multicore cable. Please choose
from the most appropriate after reading the
descriptions:
By connecting the appliance to a cooker point
having a double
providing at least 3mm contact separation in
all poles and protected with a fuse or
miniature circuit breaker at your mains fuse
box.
If you wish to connect an oven and a hob to a
cooker point you can, by connecting the oven
and hob separately to the cooker point. See
Fig. 2.
pole isolating switch
Fig. 1
Fig. 2
33