Barco R9806700 Installation Manual page 38

9. Starting up the ACSAR
Switching the ACSAR into the Economic mode is only possible with the selection wheel.
Switching to Standby/Economic with selection wheel
1. Rotate selection wheel until item STANDBY appears in the select menu. (image 9-3)
2. Press the selection wheel to confirm.
The unit switches into the standby mode and the standby menu appears in the graphical display. (image 9-4)
3. Rotate the selection wheel until item ECONOMIC is pointed and press wheel to confirm.
The unit switches into the economic mode which results in a lower dissipation of the unit inclusive turning off backlighting of the
graphical display. (image 9-5)
Press selection wheel again to return to Standby menu (image 9-4).
Graphical Display
SOURCE 6 [H:15 kHz
"video625.c05"
SELECT
STANDBY
Image 9-3
Select menu
Graphical Display
STANDBY
MENU
>POWER
ECONOMIC
Image 9-4
Standby menu
Graphical Display
ECONOMIC
Image 9-5
Economic mode
Switching to Standby with the Remote Control
1. Press the STBY button on the Remote Control for a few second
The unit switches into the standby mode and the standby menu appears in the graphical display (image 9-4).
2. Switching to the Economic mode, use selection wheel on ACSAR .
Switching to Standby using Touch Panel
1. Press POWER in the ACSAR menu again on the touch panel.
The unit switches into the standby mode and the standby menu appears in the graphical display (image 9-4).
2. Switching to the Economic mode, use selection wheel on ACSAR .
34
V:50 Hz]
R5976519 ACSAR 12122002