Power Switch Setting; A/D Calibration - Apogee ROSETTA 200 User Manual

ROSETTA 200 – User's Guide
Additional Configurations -

Power Switch Setting

JUMPER P3
DESCRIPTION
(as seen from front)
When AC power is applied to the input, the unit does not
power up immediately; to power on the unit,the POWER
button must be pressed.
When AC power is applied to the input, Rosetta 200 powers
on immediately; nevertheless, the POWER switch is
functional.
Figure 6
Figure 7

A/D Calibration

-20 -19
Figure 7
dBfs (CAL mode only)
continued
JUMPER P3
for example: -16.4 dBfs
-18 -17 -16 -15 -14 -13 -12 -11 -10
for example: -12 dBfs
10
APOGEE ELECTRONICS