Unpacking - Sonic Frontiers Power 1 Operating Manual

Unpacking

At this point we can assume that you have successfully opened the box flaps and found
this manual. The box was designed to ensure the safe transport of the amplifier. Sonic
Frontiers strongly recommends the storage of the Power 1 box in a safe, dry place. In the
event that the amplifier may have to be shipped in the future, the original box is the best
means for the protection and safety of the Power 1 during transportation.
You may want to enlist a friend's help to remove the amplifier from the box as the
distribution of the weight can make this awkward (hint: the back of the chassis is the
heavy end). Here is a chart listing what you will find in the box:
Tube Complement:
Slot Screwdriver
Phillips Screwdriver
Biasing Tool
Power Cord
Cotton Gloves
Extra Fuse
Amplifier
Tube Cover
Warranty Card
Operating Manual
If after your inspection of the contents there is a discrepancy, contact your dealer or
Sonic Frontiers immediately.
Removing the Tube Cover
To remove the cover, loosen and remove the 4 screws installed from
the bottom, 2 per side. Lift the cover straight up and away from the
tubes.
To add the cover, simply place the cage over the tube top, replace and
tighten the 4 large screws.
1
Packaged Items
4-6550C or KT88
6-6922
1
1
1
1
1 pair
2
1
1
1
1