Page 2
Skilled in the art of grinding Operations manuals are available in the following languages at www.baratza.com English .pdf Spanish .pdf French .pdf...
The Maestro uses a 240 watt DC motor. The motor spins at less than one-third the speed of the AC motors used in most home grinders, making it much quieter and lower in pitch. In addition, it possesses a thermal safety device that protects the motor from overheating and automatically resets once the motor cools.
Notes ...12 BEFORE USING YOUR GRINDER Prior to using your Maestro Plus grinder for the first time you should wash the bean hopper and ground coffee bin in warm soapy water. See the section on Care and Cleaning for instruction on how to remove and reinstall these parts.
877-701-2021. • Baratza will not accept any liability for damage or injury if the grinder is used other than for its intended purpose or is improperly operated or repaired. All warranty claims will be void.
Place the Maestro Grinder on a level surface. Insert the plug into a 120V AC outlet. Remove the lid from the hopper by lifting off. Pour the desired quantity of roasted whole coffee beans into the hopper up to a maximum of 8 oz.
The Maestro is equipped with a specially designed On/Off switch. You may rotate the switch clockwise or counter clockwise from any position without damaging it. The quantity of ground coffee you need depends on the type of bean, coarseness of the grind, brewing method and personal taste.
Care and Cleaning Cleaning the Housing and Hoppers Switch the grinder off and remove the plug from the power supply. Remove any remaining beans from the bean hopper (it may be easiest to tip the grinder over and pour the beans into a bowl.).
Cleaning the Ring Burr Use the bristle brush (included with your grinder) to remove any loose coffee residue on the ring burr, the center cone burr and in the adjustment area. Vacuum or blow out the residual coffee. Wash the silicone seal in warm soapy water and dry.
Grindz™ residue. Discard the ground coffee. For information on Grindz™ go to www.urnex.com. Grindz™ can be purchased at www. baratza.com Clean the Coffee-Dispensing Chute Remove the grounds bin. Using your bristle brush, clean out any coffee grounds that may be accumulating in the coffee-dispensing chute.
For a complete and updated troubleshooting guide go to www.baratza. com FAQ section. Grinder does not run when switched on. Insure the hopper is correctly in place and rotated at least two clicks clockwise (set to a number less than 40).
One-year from date of purchase. United States and Canada Warranty Information If your grinder fails within one year: e-mail: support@baratza.com or call 877-701-2021. Baratza will deliver an identical or comparable replace- ment grinder to your door, free of charge, and arrange to have your “failed”...