Automatic Cleaning - Baratza Preciso Operation Manual

Cleaning the Grinding Chamber Exit Port:
Photo # 3
can help complete the cleaning.
The use of Grindz will NOT clear a clogged grinder, this can only be
done by following the steps in "Clearing a Clogged Grinder".
A thorough, fast, and easy cleaning can be ac-
complished using Grindz
dz is a product designed to dislodge coffee par-
™
ticles and absorb and remove odors and coffee
oil residue. Simply place one packet of Grintz
into the empty grinder hopper. Adjust grind set-
ting to 20, and operate as if grinding coffee beans
until all of the Grindz
complete, we recommend passing about 4 Tbs. of
coffee through the grinder to remove any Grindz
residue. Discard the ground coffee. For informa-
tion on Grindz go to www.urnex.com.
™
Grindz can be purchased at www.baratza.com
™
Turn the grinder so the back is facing you, then
rotate the black adjustment ring counter clockwise
until it stops. The rectangular cutout on the ring
should now be at the 11 o'clock position (see pho-
to # 3). Directly below the cutout, at the bottom of
the chamber is the exit port leading to the grounds
bin. If the exit port is clogged, clear it with the
jumbo paper clip and brush. Make sure the exit
port and grounds chute are clear all the way to the
exit of the grounds chute. A blast of compressed air

Automatic Cleaning

Note
grinder cleaner. Grin-
™
has been ground. Once
™
11
™
™