Forte Thank you for purchasing the Forté or the weighing, while grinding to within (+/-) 0.2 Forté Brew Grinder. With the Forté , it is of a gram. The time-based dosing allows easier than ever to grind by weight or time for grinding directly into your porta filter.
Removing the Bean Hopper and Upper Burr ......... 10 Replacing the Upper Burr and Bean Hopper ........11 Replacing the Bean Hopper ............11 Automatic Cleaning ................. 11 Warranty and Service ................12 Grinding Notes ..................13 Baratza Contact Information ............... 14...
to the OPEN position. Center the Initial Operation ground coffee bin in front of the Place the Forté grinder on a lev- grinder and slide it in onto the load el surface. With the hopper lid in cell platform. Press WEIGHT, then place, mount the hopper on the press TARE.
Grind Adjustments (cont.) Weight-based Grinding Operations Move the Macro lever (right side) up or down to the desired grind Select WEIGHT, then insert the size. Set the Micro adjustment le- ground coffee bin on the load cell ver (left side) to the middle of the and press TARE then press one scale.
you can stop the unit by press- Programming Dosing ing the STOP button. The motor Weights or Time will stop and the screen will re- The Forté is equipped with three set to the selected preset weight. programmable buttons for both You can also press M (manual) Weight and Time.
Press TIME and the desired preset settings for your personal taste. If dose button, then press START. the grinder is unplugged it will re- The grinder will run for the preset tain the stored settings. dose time and stop automatically. Sleep Mode Forté...
If you is nothing on the scale platform. Plug the Forté back in and while do not have a Baratza tool you can substitute with a 2mm Allen it powers on hold buttons M and wrench. Determine direction to WEIGHT until a value between 1500-3000 is displayed.
Removing the Bean Hopper and Upper Burr Note The icons and arrows on top of Baratza Burr Tool indicating the di- rection to turn. Rotate the Hopper Guard so it is CLOSED, then press the START button to run any re- maining beans through the grinder.
Grind all of the tablets into -clockwise until finger tight . Us- the bin, then press STOP. Once ing the Baratza Burr Tool, rotate complete we recommend grinding the burr carrier counter-clockwise some coffee (4 tbs.) to remove any an additional 1/8 inch or 2 mm.
For repairs or Questions cannot be solved over the phone e-mail: support@baratza.com and the problem is determined to be a warranty issue, then Baratza For parts and information go to: will deliver an identical or compa- www.baratza.com rable replacement to your door, free of charge and arrange to have your “failed”...