Hot Water - Espressione Supremma Super Automatic Instruction Manual

13 HOT WATER

1. Check that the coffee-maker is ready.
2. Place the glass or cup under the steam
nozzle.
3. Press the 'hot water' button. The hot water
symbol will appear inside a square frame.
The screen also indicates your selection:
4. Turn the steam regulator anticlockwise
as far as it will go (180°). Close it when
you have obtained sufficient hot wa-
ter.
5. Remove the glass or cup filled with hot
water.
6. Press the 'hot water' button or the ES-
CAPE button to disable this function.
The frame around the hot water symbol
will disappear.
7. The coffee-maker is ready to make coffee.
o
14 STEAM
1. Check that the coffee-maker is ready.
2. Place a glass or jug under the steam nozzle.
3. Press the 'steam' button. The frame around the steam sym-
bol will light up.
While the coffee-maker is heating up, the screen will display
the hourglass symbol:
When the coffee-maker is ready to obtain steam, the steam
symbol is displayed on the screen:
The maximum steam draw-off time is about 4 min.
4. Place a container under the steam nozzle and open it by
turning the steam regulator clockwise to empty any pos-
sible residual water that may have been left in the steam
nozzle. Close the steam nozzle and throw the water away.
5. Position the cup or jug with the liquid
that is to be heated up. To obtain steam,
turn the steam regulator anticlockwise.
Close the steam regulator when you
have finished heating up the liquid. N.B.
To heat up the milk and make it frothy,
move the cup or jug in circles.
6. Remove the cup or jug with the heated
liquid or frothy milk.
10