Page 1
SOLO SERIES CXC-300/400 Discrete FET Bass Amplifier Owner’s Manual 1/10/99...
Page 2
This compact, rack mountable package houses modular circuits made with superior components and designed for years of trouble-free service. Thank you for choosing Eden. Please take the time to review this manual and to send in your warranty registration card.
FRONT PANEL FEATURES controls will boost or cut the selected frequency by 15 db. They are flat at their 12:00 setting. Input Jack – Designed to accept a standard ¼ inch mono phone plug. For best Treble – This is a traditional shelving-type results, use a high-quality, shielded cable to tone control.
are wired in parallel. The total speaker the D.I. will continue to operate normally system impedance should not exceed 4 even when the amplifier is in thermal shut ohms. down only the stage sound will be lost.) Effects Send/Return – These standard ¼ OPERATING INSTRUCTIONS jacks allow you to send and receive your MECHANICAL AND THERMAL...
Page 5
compressor light if the compressor is Extreme settings of boost or cut are unlikely engaged (enhance knob pushed in) and the to be necessary or helpful. Set Level light if the compressor is disabled (enhance knob pulled out). If more We are frequently asked to provide compression is desired, increase the gain suggested settings for various styles of play.
55363 MAINTENANCE (763) 675-1890 Your Eden amplifier has been designed to require minimal routine maintenance. Attention to the following areas will ensure (763) 675-3777(fax) optimum performance of your amplifier. Contact Point Cleaning –...
Need help?
Do you have a question about the Solo CXC-300 and is the answer not in the manual?
Questions and answers