Advanced Setup - ECS A875M-A Manual

30

Advanced Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
AMD C&Q
Core Performance Boost
Enhanced Halt (C1E)
Quick Power on Self Test
Boot Up Numlock Status
APIC Mode
1st Boot Device
2nd Boot Device
3rd Boot Device
Hard Disk Drivers
CD/DVD Drivers
Boot Other Device
ECS eJIFFY Function
AMD C&Q (Auto)
This item helps the system to lower the frequency when CPU idles. When the
frequency decreases, the temperature will drop automatically as well.
Core Performance Boost(Auto)
This item only shown when use Phenom II X6 processor. The function is to
switch the active CPU cores to enhance CPU frequency.
Enhanced Halt (C1E) (Disabed)
This item enables or disables enhanced halt.
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
1st/2nd3rd Boot Device (Hard Drive/CD/DVD/Removable Dev.)
Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
Advanced Setup
Auto
Auto
Disabled
Enabled
On
Enabled
Hard Drive
CD/DVD
Removable Dev.
Press Enter
Press Enter
Yes
Disabled
: Move Enter : Select +/-/: Value F10: Save
F1:General Help
F9: Optimized Defaults
Using BIOS
Help Item
Enable/Disable Secure
Virtual Machine Mode
(SUM)
ESC: Exit
auto