ECS A740GM-M Manual page 59

The following Windows Setup screen appears:
Figure 1.11 Windows Setup—Selected SCSI Adapter
b Select "ATI AHCI Compatible RAID Controller-x86 platform" and press
Enter for 32-bit OS or Select "ATI AHCI Compatible RAID Controller-x64
platform" and press Enter for 64-bit OS.
The following Windows Setup screen appears listing both drivers:.
Figure 1.12 Windows Setup—AMD drives listed
5 Press Enter to continue with Windows XP Installation.
Be sure to leave the floppy disk inserted in the floppy drive until the blue
screen portion of Windows XP installation is completed, then take out the
floppy.
6 Follow the instructions on how to install Windows XP.
After Windows XP is completely installed, it is recommended that you
install the ForceWare software in order to access the FastBuild RAID Man-
agement tool.
Each time you add a new hard drive to a RAID array, the RAID driver
Note:
will have to be installed under Windows once for that hard drive. After
that, the driver will not have to be installed.
AMD RAID Configuration
55