Integrated Peripherals - ECS A740GM-M Manual

34

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Onboard IDE Controller
SATA Configuration
Onboard SATA Mode
Onboard AUDIO Function
Onboard LAN Function
Onboard LAN Boot ROM
Serial Port1 Address
OnBoard IR
Parallel Port Address
Parallel Port Mode
ECP Mode DMA Channel
Parallel Port IRQ
USB Functions
Legacy USB Support
OnBoard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
SATA Configuration (Enabled)
Use this item to show the Serial ATA Configuration options: Disabled, Compatible,
Enhanced.
OnBoard SATA Mode (IDE)
Use this item to enable or disable the onboard SATA mode.
OnBoard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
OnBoard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
OnBoard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.
OnBoard IR (Disabled)
This item is used to enable or disable the onboard infrared port, and to assign a port
address.
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a port
address.
Integrated Peripherals
Enabled
Enanled
IDE
Enabled
Enabled
Disabled
3F8&IRQ4
Disabled
378
ECP
DMA3
IRQ7
Enabled
Enabled
: Move Enter : Select
+/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Using BIOS
Help Item
Options
Disabled
Enabled