Integrated Peripherals - ECS G41T-M12 Manual

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Onboard IDE Controller
Onboard SATA Controller
Onboard Audio Function
Onboard LAN Function
Onboard LAN Boot ROM
Serial Port1 Address
Parallel Port Adress
Parallel Port Mode
ECP Mode DMA Channel
Parallel Port IRQ
USB Functions
Legacy USB Support
: Move
F1: General Help
Onboard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
Onboard SATA Controller (Enhanced)
This item allows you to enable or disable the onboard SATA controller.
Onboard Audio Function (Enabled)
Use this item to enable or disable the onboard audio device.
Onboard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a portaddress.
Parallel Port Mode (ECP)
Use this item to select the parallel port mode. You can select Normal (StandardParallel
Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), orBPP (Bi-
Directional Parallel Port).
ECP Mode DMA Channel (DMA3)
Use this item to assign a DMA channel to the parallel port.
Parallel Port IRQ (IRQ7)
Use this item to assign IRQ to the parallel port.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices.
Press <Esc> to return to the main menu setting page.
Integrated Peripherals
Enabled
Enhanced
Enabled
DISABLED: disables the
Enabled integrated IDE
Disabled
Controller.
3F8/IRQ4
ENABLED: enables both
378 Controllers.
ECP
DMA3
IRQ7
Enabled
Enabled
Enter : Select +/-/: Value
F10: Save ESC: Exit
F9: Load Default Settings
Using BIOS
33
Help Item