dbx 576 Owner's Manual page 10

Preamp Controls (cont.)
INSERT LEVEL switch
This allows you to monitor the signal level sent post-tube to an external processor unit (switch out)
or the signal level returning to the 576 from an external unit (switch in).
OUTPUT LEVEL switch
This configures the meter to show the output signal level. This works in conjunction with the output
level assignment switch on the back of the 576. When the rear switch is set to +4 dBu, a meter read-
ing of 0 VU corresponds to +4 dBu output. When the rear switch is set to -10 dBV, a meter reading
of 0 VU corresponds to -10 dBV output.
DITHER switch
ª
This switch becomes active only when the optional dbx Conversion System digital output
TYPE IV
ª
module is installed. Refer to the manual for the Conversion System for a description of the
TYPE IV
function of this switch.
SHAPE switch
ª
This switch becomes active only when the optional dbx Conversion System output mod-
TYPE IV
ª
ule is installed. Refer to the manual for the Conversion System module for a description of
TYPE IV
the function of this switch.
8