High/Low Beam Switch; Flash-To-Pass; Front Fog Lights - If Equipped - Chrysler PT Cruiser Owner's Manual

High/Low Beam Switch

Push the multifunction lever away from you to switch
the headlights to high beams. Pull the lever toward you
to switch the headlights back to low beams.

Flash-to-Pass

You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward the steer-
ing wheel. This will turn on the high beam headlights
until the lever is released.
Front Fog Lights — If Equipped
The front fog light switch is in the multifunction
lever. To activate the front fog lights, turn on the
parking or low beam headlights and pull out the
end of the lever.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103
Fog Light Operation
NOTE: The fog lights will only operate with the parking
lights or the headlights on low beam. Selecting high
beam headlights will turn off the fog lights.
3