Programming Homelink - Chrysler Aspen Owner's Manual

WARNING!
Your motorized door or gate will open and close
while you are training the Universal Transceiver. Do
not train the transceiver if people or pets are in the
path of the door or gate. Only use this transceiver
with a garage door opener that has a "stop and
reverse" feature as required by federal safety stan-
dards. This includes most garage door opener models
manufactured after 1982. Do not use a garage door
opener without these safety features. Call toll-free
1–800–355–3515 or,
www.HomeLink.com for safety information or
assistance.
on the Internet
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177
Vehicle exhaust contains carbon monoxide, a danger-
ous gas. Do not run your vehicle in the garage while
training the transceiver. Exhaust gas can cause seri-
ous injury or death.

Programming HomeLink

Before You Begin
If you have not trained any of the HomeLink buttons,
at
erase all channels before you begin training.
To do this, press and hold the two outside buttons for 20
seconds. The EVIC will display "CLEARING CHAN-
NELS." Release the buttons when the EVIC message
states "CHANNELS CLEARED."
WARNING!
3