Sound; Others - LG LST3510A - HDTV Receiver / Hi-Format DVD Player Owner's Manual

Before Operation (Continued)

Sound

Digital Audio Output
Each DVD disc has a variety of audio output options.
Set the DVD/HDTV Receiver's Digital Audio Output
according to the type of audio system you use.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
if you connect the DVD/HDTV Receiver's DIGITAL OUT
jack to a Dolby Digital decoder (or an amplifier or other
equipment with a Dolby Digital decoder).
Stream/PCM: Select "Stream/PCM" if you connect the
DVD/HDTV Receiver's DIGITAL OUT jack to an amplifi-
er or other equipment with a DTS decoder, Dolby Digital
decoder or MPEG decoder.
PCM: Select "PCM" if you connect to a 2-channel digital
stereo amplifier. The DVD/HDTV Receiver outputs
sound in the PCM 2ch format; when you play a DVD
video disc recorded on a Dolby Digital, MPEG1, or
MPEG2 recording system.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Digital Audio Output

Others

Sample Frequency
To change the Sample Frequency setting, first select the
desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz sig-
nals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
Others
PBC Setup
PBC can be turned on or off using
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Digital Audio Output
Others
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio
CDs.
(SELECT).
PBC On
43