Hd Monitor Rgb Connections - LG LST3510A - HDTV Receiver / Hi-Format DVD Player Owner's Manual

Connections (Continued)

HD Monitor RGB Connections

Antenna
OR
1 1 Connect the "Antenna/Cable" to the "ANT IN" jack on the DVD/HDTV Receiver using a coaxial RF cable.
1 1
ote
There might be some areas where the signal strength could be too high. If so, you may need to connect the
antenna to an optional attenuator. Screw the attenuator onto the "ANT IN" jack. (Refer to page 12.)
Connect the "ANT LOOP OUT" jack on the DVD/HDTV Receiver to the "Antenna In" jack on your TV using a
2 2
coaxial RF cable.
Connect the "RGB OUT" jack on the DVD/HDTV Receiver to the "RGB IN" jack of your TV using VGA-type con-
3 3
nector. (The Output Selection must be set to RGB, refer to Setting the Display Format on page 19)
Connect the L/R "AUDIO OUT" jacks on the DVD/HDTV Receiver to the L/R "AUDIO IN" jacks on your TV using
4 4
RCA-type cables.
otes
• The RGB output is useable if 1080i, 720p, 480p, native, variable 1, variable 2, or variable 3 display format is
selected.
• RGB signal is not output through the "RGB OUT" jack during playing back a DVD which copy protection signals
are recorded. We recommend that you use component video connection and 480p or 480i resolution.
Cable TV
Wall Jack Panel
HD Ready TV Connection Panel
ANTENNA S-VIDEO
AUDIO INPUT
INPUT INPUT
R
L
DVD/HDTV Receiver Connection Panel
VIDEO
RGB INPUT
INPUT
15