Installation Instructions - Acer LCD monitor 15 User Manual

INSTALLATION INSTRUCTIONS

SWIVEL BASE IVEL BASE
Install
Figure 1
POWERCORD
Power Source:
1. Make sure that the power cord is the correct type required in your
area.
2. This LCD monitor has an External universal power supply that allows
operation in either 100/120V AC or 220/240V AC voltage area (No user
adjustment is required.)
3. Connect the AC-power cord into your LCD monitor's AC-power-input.
The AC-power cord may be connected to either a wall power outlet or
the power outlet socket on your PC, depending on the type of power
cord supplied with your LCD monitor.
NOTES
A certified power supply cord has to be used with this equipment. The
relevant national installation and/or equipment regulations shall be
considered. A certified power supply cord not lighter than ordinary
polyvinyl chloride flexible cord according to IEC 60227 (designation
H05VV-F 3G 0.75mm
Alternative a flexible cord be of synthetic rubber according to IEC 60245
(designation H05RR-F 3G 0.75mm
Installing and Removing the Swivel Base
2
or H05VVH2-F2 3G 0.75mm
2
) shall be used.
4
Remove
2
) shall be used.