Installation Instructions - Acer EH301CUR User Manual

Installation instructions

Note: Remove the monitor and monitor base from its packaging.
Carefully place the monitor face-down on a stable surface -- use a
cloth to avoid scratching the screen.
Installation
Installation
1. Unwrap and remove the bracket and base. Remove three screws on the bracket base with screwdriver.
Fasten the screw to the hole on the bottom of the base and secure the screw with the bracket.
2. Remove the Styrofoam on the back of the display. Remove the five screws on the rotating shaft of
the back cover with screwdriver. Assemble the component of the bracket base from Step 1 with
rotating shaft of back cover and secure them with screws.
3. Clip the cover of t he bracket to the bracket from top.
Disassembly
1. Remove the bracket cover f rom bottom.
2. Remove the five set screws between the bracket and the rotating shaft of back cover. Remove the
component of the bracket base. Secure the screw into the hole at the rotating shaft of back cover.
3. Remove the three set screws between the bracket and the bottom of the base with screwdriver.
Remove the bracket and base. Secure the screw directly into the hole at the bottom of the bracket.
Disassembly
Install and remove stand and base
2