Creating a partnership
After completing the installation procedures, set up a partnership between
your Acer d100 series and your computer with the help of the New
Partnership setup wizard.
Once you've created a partnership, you will be able to synchronize contact
information using ActiveSync. Refer to the
for more information.
To create a partnership:
1. If you want to upload files into an SD/MMC card for use with your
Acer d100 series, insert the card to the device.
2. Connect the device to your computer using the bundled USB cable.
a.
b.
Acer d100 Portable Navigator
Plug the cable's smaller connector to the USB port
panel of the device.
Plug the USB client connector into an available USB port on your
computer.
Acer d100 fundamentals
contacts" section
"Synchronizing
on the left
21