Candy AQ 125 Instructions For Use Manual page 5

EXTRA RINSE button
This function will allow an extra rinse or more water added at the rinse stage – depending on
the programme selected. This is particularly important for avoiding skin irritation from
detergent residues for people with particularly sensitive skin.
The extra rinse button is also recommended when washing heavily soiled fabrics, requiring
the use of a lot of detergent, or when washing items made of towelling, whose fibres have a
greater tendency to retain detergent.
RINSE-HOLD button
Pressing this button (which operates only during the DELICATES programmes) means the
cycle stops at the final rinse stage, leaving the drum filled with water.
The garments thus stay immersed in the water, preventing them from bunching up and
forming creases that are difficult to remove.
When the button is reset the cycle ends with the water being pumped out followed by the spin
stage.
If only pumping out is required, without spin, to minimise creasing you must:
- switch off the machine (press the On/Off button);
- select programme Z;
- switch on the machine again (by pressing the On/Off button);
- reset the Rinse-hold button.
INTENSIVE WASH button
This function which is available on all cotton programmes is very useful for heavy soiling.
The temperature is kept constant throughout all the wash phases and the programme is
extended to ensure an extra deep cleaning performance.
8
WASH TEMPERATURE selector
D
Can be turned in either direction
This washing machine is equipped with this device for
setting the wash temperature you want. We recommend
that the temperature shown on the label inside garments
should never be exceeded.
The most suitable temperature and cycle for each type of
fabric is shown in the programme guide.
E
To protect fabrics, if the variable temperature dial has
accidentally been set too high than stated in the
programme guide, the machine will lower the temperature automatically.
PROGRAMME Selector
Note: never turn the dial anti-clockwise (Turn it
clockwise and do not press the on/off button before
selecting the programme.)
The tables in the washing section describe the various programmes and give the number or
symbol to select for them.
F
IMPORTANT : IF YOU NEED TO CHANGE A PROGRAMME THAT
HAS ALREADY STARTED – SWITCH OFF THE MACHINE BY THE
ON / OFF BUTTON AND THEN MOVE THE PROGRAMME DIAL
TO THE CORRECT POSITION. IF YOU DO NOT PRESS "OFF"
BEFOREHAND, THE DIAL WILL AUTOMATICALLY MOVE TO ITS
INITIAL POSITION.
OK
9
I
L