Upper Threading - Brother Pacesetter PS-21 Operation Manual

KNOWING YOUR SEWING MACHINE —————————————————————————————————————————

Upper Threading

1 Spool pin
2 Thread guide
CAUTION
●
Make sure you thread the machine
properly, otherwise the thread could
tangle and break the needle.
Set the main power switch to "O".
1
Raise the presser foot lever and turn the balance
wheel toward you (counterclockwise) to raise
the thread take-up lever to its highest position.
2 Pull up the spool pin and put a spool of thread
on this pin.
CAUTION
●
If the spool of thread is in the wrong place, or
is set incorrectly, the thread may tangle on
the spool pin and cause the needle to break.
3 Pass the thread through guides.
2
3
4
1 Spool pin
2 Thread guide
3 Tension discs
4 Thread take-up lever
18
2
4
3
1
3 Tension discs
4 Thread take-up lever
4 While holding the thread, pull it between the
tension discs.
5 Guide the thread to the back of the thread
take-up lever and around to the left. Bring the
thread through the slit by pulling it toward
you and into the eyelet.
1
1 Thread take-up lever
1
1