BMW Mini series Owner's Handbook Manual page 118

Entertainment
Selecting station manually via frequency
1. Press the button.
2. Press respective button to enter desired fre-
quency.
Or with the right-hand knob:
1. Press the button.
2. Turn the right-hand knob until the desired
frequency is reached.
Automatically updating the station with
best reception
FM station
Hold the button down until
"Autostore" is displayed.
It may take several seconds until the stations are
saved and one of these stations can be heard.
If TP is switched on, see page 117: A traffic
reports station is selected.
MW station
1.
Press the button repeatedly until
the desired MWA memory level has been
selected.
2.
Hold the button down until
"Autostore" is displayed.
It may take several seconds until the stations
are saved and one of these stations can be
heard.
If you do not want to use Autostore, you
can save respectively six stations of your
choice in the memory levels FMA or
Scanning and selecting stations, Scan
You can sample all receivable stations
approx. 10 seconds.
116
Radio MINI Boost CD
MWA.<
Online Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AG Online Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AG
Press the button.
Interrupting the scan and selecting a station:
Press the button.
Saving and recalling a station
Memory locations
Your radio can save 42 stations:
> FM1, FM2, MW: six stations each of your
choice
>
FMA, MWA: the six stations with the strong-
est signals automatically
Memorising stations
1.
Press the appropriate button
repeatedly until the desired frequency range
is selected.
2. Select a station.
3.
...
ton until the station can be heard again after
a short break.
The memory level and the selected button
are shown on the left of the display, e.g.:
Retrieving saved stations
1.
Press appropriate button repeat-
edly until the desired wavelength range has
been selected.
2.
...
With the right-hand knob:
Turn the right-hand knob until the desired sta-
tion is reached.
Hold down desired but-
Press desired button.