BMW Mini series Owner's Handbook Manual page 111

>
Speed-related volume:
To level 3
To reset these settings:
1. Hold button down until "REG ON" or "REG
OFF" is displayed.
2. Press the button repeatedly until
"RESET?" is displayed.
3. Press the button.
Setting tone
You can choose between the following settings:
>
Bass: deep tone setting.
> Treble: high tone setting.
>
Fader: volume distribution front/back.
>
Balance: volume distribution left/right
The volume distribution front/back - left/right as
well as the bass and treble settings remain the
same even after changes of the audio sources.
The settings for bass and treble are saved for the
currently used remote control.
Setting treble, bass and volume
distribution
1. Press the button.
"BASS" is displayed.
2. Keep pressing
tone setting is displayed. Treble, fader or
balance.
3. Press ... button repeatedly until the
desired setting is made.
Resetting the tone settings
The tone settings are reset to the middle setting:
>
Bass and treble for the current audio source
>
Volume distribution front/rear and left/right
for all audio sources
In order to reset the tone settings:
Online Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AG Online Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AG
button until the desired
Radio MINI CD
1. Press button.
2. Press button repeatedly until "TONE LIN?"
is displayed.
3. Press the button.
Displaying the time
Press the button.
The time can be displayed for approx. 8 seconds
when the ignition is switched off.
Setting time, see page 64.
Radio
Your radio is designed for the wave ranges FM
and AM.
Listening to radio
1. Switching on radio, see page 108.
2. Press button repeatedly until the
desired wavelength range is selected.
> AM: MW/MWA
>
FM: FM1/FM2 and FMA
Selecting a station
The selected radio station is stored for the
remote control currently in use.
Next station
Press the ... button.
The next receivable station is selected.
TP switched on, see page 110: The next traffic
reports station is selected.
Selecting station manually via frequency
1. Press the button.
On the display, in addition to the frequency
or the station name, "m" is displayed.
2. Press ... button or hold it down.
Entertainment
109