3Com 3C13640 Installation Manual page 25

3Com Router 3000 ADSL2+ Family
Installation Guide
Select <1> to change the parameters for downloading. The following information is
displayed:
Change Boot Parameter:
'.' = clear field;
boot device
processor number
host name
file name
inet on ethernet (e) : 169.254.10.10
inet on backplane (b):
host inet (h)
gateway inet (g)
user (u)
ftp password (pw) (blank = use rsh):
flags (f)
target name (tn)
startup script (s)
other (o)
Note:
You can change the parameter settings behind the colons (:).
The 3040/3041 allows you to download programs through both TFTP and FTP.
After you set the parameters, select <2> to start downloading.
3) To clear application password, select <4> in the Boot Menu. This is used for clearing a
superuser password. The setting takes effect only once and at a reboot superuser
password authentication is enabled.
Caution:
Upgrade router software only when necessary and with help of engineers. When doing that, make sure that the Boot
ROM software version can work with the version of the adopted application program.
4) To enter the Boot ROM submenu, select <7>.
'-' = go to previous field;
: fei0
: 0
: 8040
: M8240ram.arj
: 169.254.10.11
:
: 8040
: 0x0
:
:
:
3-6
3. Starting and Maintaining the Router
^D = quit