Connecting Power Supply - 3M X55 Operator's Manual

Connecting power supply

WARNING ►Please use extra caution when connecting the power cord as
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the power cord's
specified voltage range.
• Never modify the power cord. Never attempt to defeat the ground connection
of the three-pronged plug.
1.
Connect the connector of the power cord to the
AC inlet of the projector.
2.
Firmly plug the power cord's plug into the outlet.
© 3M 2004
Connector
of the power cord
3M™ Digital Projector X45/SX55
AC inlet
Setting up
13