Kyocera ECOSYS FS-3140MFP Operation Manual page 32

FAX No. Entry:
0123456789*
[ Chain ] [ Detail ]
Key
Sub Address
Encrypted TX
TX Start Speed
ECM
NOTE:
number of the receiving system.
Spaces will be automatically inserted if you use
end of the row to advance the cursor before entering
more characters.
Use
To correct the number, press the Clear key to delete the
digits one by one before reentering the number. To
delete all entered digits and return to the default screen,
press the Reset key.
Address Recall/Pause
Pressing this key adds about three seconds of waiting
time during dialing. For example, when dialing the
receiving system on an external line, you can use this
method to insert a pause before resuming dialing after
you dial a specific number.
Make detailed settings for sending as necessary. Press
A b
[Detail] (the Right Select key) to display the FAX Detail
menu. Press the
[Encrypted TX], [TX Start Speed] or [ECM] and change
settings, and then press the OK key.
Description
To communicate using the sub address, change this
setting. For details, refer to Sub Address
Communication on page 4-25.
To send faxes using encryption, change this setting.
For details, refer to Encryption on page 6-25.
To change the transmission start speed, change this
setting. Select the speed from 33,600 bps, 14,400 bps,
and 9,600 bps.
ECM (error correction mode) is a function to
automatically resend an image that has not been
correctly sent or received due to the effects of noise on
the telephone line during transmission. To change the
ECM communication setting, change this setting.
On Hook
Press this key to connect to the telephone line.
When the FAX number has been entered, the machine starts
dialing to the receiving system.
3-4
Up to 64 digits can be entered as the fax
or to move the cursor.
or key to select [Sub Address],
FAX Operation (Basic)
at the