Table of Contents
Advertisement
[4 DRAM Clocks], [5 DRAM Clocks], [6 DRAM Clocks], [7 DRAM Clocks], [8
DRAM Clocks], [9 DRAM Clocks], [10 DRAM Clocks], [11 DRAM Clocks], [12
DRAM Clocks], [13 DRAM Clocks], [14 DRAM Clocks], and [15 DRAM
Clocks].
Initate Graphic Adapter
This item shows the primary graphic adapter. The default value is [PCIE].
Internal Graphics Mode Select
If you select [Auto], the onboard VGA will be automatically disabled when
you install VGA card; the onboard VGA will be enabled without the installa-
tion of any add-on VGA card. If you select [Enabled, 8MB] or [Enabled,
1MB], the onboard VGA will be enabled.
DVMT Mode Select
Use this option to adjust DVMT mode. Configuration options: [Fixed Mode],
[DVMT Mode] and [Fixed+DVMT Mode]. The default value is [DVMT Mode].
DVMT (Dynamic Video Memory Technology) is an architecture that offers
breakthrough performance for the motherboard through efficient memory
utilization. In Fixed mode, a fixed-size fragment of the system memory is
allocated to the graphics core. In DVMT mode, the graphics driver allocates
memory as needed for running graphics applications and is cooperatively
using this memory with other system components. In Fixed+DVMT mode,
the graphics processor gets a fixed-size chunk of 64MB of memory and up
to 64MB of dynamically-allotted memory. This mode guarantees that at least
64MB of memory is available to the graphics core, with a possibility to
increase this amount to 128MB, if necessary.
DVMT/FIXED Memory
You are allowed to adjust the shared memory size in this item if you set
DVMT Mode Select as [DVMT Mode]. Configuration options: [64MB], [128MB]
and [Maximum DVMT].
OnBoard HD Audio
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If
you select [Auto], the onboard HD Audio will be disabled when PCI Sound
Card is plugged.
Front Panel Control
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio Front Panel.
OnBoard LAN
This allows you to enable or disable the "OnBoard LAN" feature.
VCCM (DRAM) Voltage
Use this to select VCCM (DRAM) Voltage. Configuration options: [High],
[Middle], [Low], and [Auto]. The default value of this feature is [Auto].
VDDQ (1.25V) Voltage
Configuration options: [High], [Low] and [Auto]. The default value is [Auto].
3 1
3 1
3 1
3 1
3 1
Hide quick links:
Advertisement
Table of Contents
