Factory Settings - Ariston MCA 15 NA - 39803 Instructions For Use Manual

Programming
RINSING CYCLE
NA
This function performs a rinsing cycle using water to
clean all components involved in brewing coffee.
! A person should be present during the rinsing cycle to
supervise the operation. Before performing the rinsing
cycle fill the water tank.
Use the key to select this function:
RINSING CYCLE

FACTORY SETTINGS

Press the key.
The display will show:
RINSING CYCLE
NO
Use the key to select
RINSING CYCLE
YES
Press the key to start the rinsing cycle. The display
shows:
RINSING CYCLE
The machine dispenses about half the quantity of water
contained in the tank from the brew unit.
Then the cycle stops automatically, and the display
shows:
SELECT PRODUCT
READY FOR USE
22
Factory settings
This function resets the machine's operating
parameters to the manufacturer's settings.
Use the
Enable it with the
*
The display then shows:
Choose whether to restore parameters with the
key, and press the
! Warning: when all parameters are restored to factory
settings, all customised settings are lost.
key to select this function:
FACTORY SETTINGS
EXIT
key.
FACTORY SETTINGS
NO
key to confirm.
*